How To Replace The Water Valve On A Backpack Fogger

Tools and Parts Needed:

• Replacement Water Valve: Compatible with TMD14 models

• Phillips Head Screwdriver

Step-by-Step Instructions:

1. Locate the Water Valve: The water valve is the white component attached to the side of the throttle control handle.

2. Remove the Old Water Valve:

   • Use a Phillips head screwdriver to remove the two screws securing the water valve—one on each side.

   • Gently detach the old water valve from the throttle handle.

3. Install the New Water Valve:

   • Position the new water valve onto the throttle handle, aligning it with the screw holes.

   • Insert the two Phillips head screws and tighten them securely to fasten the new valve in place.

4. Test the Installation:

   • Ensure the valve operates smoothly by twisting it inward to open and outward to close.

   • Start the fogger and verify that the liquid flows correctly and that there are no leaks.

 Replacement Part Information

• Product: Water Valve for TMD14 Backpack Fogger

• Part Number: 3WF-3.19.1

By following these steps, you can effectively replace the water valve on your Tomahawk TMD14 Backpack Fogger, ensuring it operates efficiently for your pest control needs.