How To Replace The Throttle Cable On A TVSA-H Power Screed

The throttle cable connects to the power screed engine. The replacement throttle cable for the TVSA-H Honda Engine Power Screed Assembly fits 2019 and newer models. 

 

Here's how to replace the throttle cable on your power screed:

 

What You Will Need:

 

Instructions:

Step 1:

Using plyers and a screwdriver, remove the screw that connects the throttle cable to the throttle lever at the top of the power screed. 

Step 2:

Open the air filter to access the carburetor.

Step 3:

Remove the throttle cable from the slit on the carburetor.

Step 4:

Loosen the screw on the old throttle cable and pull out of the black slot.

Step 5:

Pull the entire throttle cable from out of the handle tube.

Step 6:

Feed the new throttle cable through the handle tube. 

Step 7:

Insert the throttle cable through the slit on the carburetor.

Step 8:

Place the screw on the black slot.

Step 9:

Make sure there is a washer on the front and back of the black slot.

Step 10:

Tighten the screw to secure the throttle cable to the carburetor. 

Step 11:

Cover the carburetor with the air filter. 

Step 12:

Connect the throttle cable at the top to the throttle lever.

 

Your power screed is now ready for use!

 

We hope this guide helped you get the most out of your backpack sprayer. Check back in to Tomahawk's comprehensive library of manuals, assembly guides, videos, & more to power your world! 

Leave a comment

All comments are moderated before being published

Popular posts

  1. How to Troubleshoot a Plate Compactor
  2. Man using a plate compactor to demonstrate the top tools for compacting soil
  3. Construction crew using a Tomahawk Power Vibratory Rammer for trench compaction.
  4. Optimum Soil Compaction: What, Why & How
  5. Pesticide Applications: Power Sprayers