The Tomahawk 3.7 Gallon Turbo Boosted Mosquito Fogger Water Valve helps you control the supply of your chosen liquid substance. The water valve is white part attached to the side of the throttle control handle. You can control the amount of herbicide or pesticide applied by twisting the valve inward to open, and outward to close.
If your water valve happens to break or is not functioning correctly, it could be time to replace it.
Follow these steps to replace the water valve on your backpack fogger:
What You Will Need
- Backpack Fogger (TMD14)
- Water Valve
- Phillips Screwdriver
Instructions
Step 1:
Remove the two screws, one on each side, from the water valve with a Phillip screwdriver.
Step 2:
Remove the old water valve.
Step 3:
Secure the new water valve in place.
Step 4:
Use a Phillip head screwdriver to insert the screws on each side of the water valve. Fasten tightly.
Your Backpack Fogger is now ready to use!
We hope this guide helped you get the most out of your backpack sprayer. Check back in to Tomahawk's comprehensive library of manuals, assembly guides, videos, & more to power your world!
