The Tomahawk TCS6.5 Concrete Sprayer Wand is the perfect tool for applying water-based concrete retardants, forming oils, and more. You can achieve even spraying patterns with a flat jet nozzle and brass attachment. The press handle attaches to the end of the sprayer hose and the flat jet tip wand attaches to end of the handle press.
If your press handle is not working and your wand is not spraying properly, its important to replace them.
Learn how to install your new spray wand attachment and press handle to your concrete sprayer:
What You Will Need
- Concrete Sprayer (TCS6.5)
- Spray Wand Attachment
- Press Handle Attachment
Instructions
Step 1:
Unscrew the flat jet tip wand from the handle press.
Step 2:
Unscrew the old handle press from the hose.
Step 3:
Screw the new handle press onto the hose.
Step 4:
Screw the new flat jet tip wand onto the handle press.
With a brand new wand and handle, your concrete sprayer is now ready to use!
We hope this guide helped you get the most out of your backpack sprayer. Check back in to Tomahawk's comprehensive library of manuals, assembly guides, videos, & more to power your world!
