Fixing the pull cord on a Honda GX160 Engine is a relatively simple process that can be completed with a few basic tools. Here is a step by step guide to help you through the process.
What You'll Need
10mm Socket/Ratchet
Screw Driver
Step 1
Take your socket and loosen the three screws keeping the recoil cover in place.
Step 2
Determine if the recoil cord is jammed or needs to be retied.
If the cord needs to be retied make a new knot to keep it in place.
If the cord is jammed unscrew located in the center and unjam the chord.
Step 3
Finally place the cover back on the engine and fasten it back in place.
You have now successfully fixed the recoil cord on your Honda GX160 Engine.
