How to Adjust Jumping Jack Rammer Handles

Out of the box your Jumping Jack rammer may need a slight adjustment to meet your needs. Here is a quick guide to raise or lower your rammer’s handles!

Using a 17mm socket loosen the larger screws on either side of the rammers roll cage. In total there are four screws. You will not need to loosen the smaller screws on the roll cage. Once loosened, adjust the handles up or down to your desired height and retighten the for larger screws. Make sure the screws are balanced and even, so operation with remain smooth. Correct your adjustments as needed for your ultimate comfort.

For any questions regarding troubleshooting, spare parts, and compaction equipment service please reach out to Tomahawk Power at (866) 577-4476 or email Our bilingual staff if happy to help!

Compaction equipmentHow to

Leave a comment

All comments are moderated before being published

Popular posts

  1. How to Troubleshoot A Plate Compactor
  2. Man using a plate compactor to demonstrate the top tools for compacting soil
  3. Construction crew using a Tomahawk Power Vibratory Rammer for trench compaction.
  4. Optimum Soil Compaction: What, Why & How
  5. Pesticide Applications: Power Sprayers